Brake disc replacement guide
How to choose the brake disc?
When choosing to replace the brake pad, quality is the first thing we should consider, try to choose the original parts or the original supporting brand, of course, the original parts in the quality is certainly no problem, but the price is also a little more expensive. If you replace the brake pads in a repair shop, you need to be very careful, because some manufacturers in order to save costs, do not set the alarm line on the steel back, all the friction material wear out, there will be no noise, this is quite dangerous.
Therefore, within the price range, or choose a well-known brand is more reliable, the general replacement of brake pad life is also much longer.
Replace brake disc (shoe)
It is generally recommended that the brake pad be replaced after the vehicle has traveled for 30,000 to 40,000 km. In general, the brake pad (hoof) must be replaced at the same time as the front axle or rear axle, that is to say, the front brake pad (hoof) should be replaced at the same time, and the rear brake pad (hoof) should be replaced at the same time. How do you tell if the brake shoe needs to be replaced?
Usually, we judge whether the brake warning light on the dashboard is on or not as the basis of whether the brake shoe (hoof) should be changed, but there are exceptions, some cars will not light up until the brake shoe (hoof) has been completely worn. At this point, the metal base of the brake pad and the brake disc are already in an iron grinding state, and you can see the bright iron chips near the rim of the tire. Therefore, check whether the brake pad is serviceable during each maintenance and replace the brake pad near the end of its service life in advance.
The choice of good brake disc, at the appropriate time for timely replacement, is an important aspect of the maintenance of the brake system, for our driving safety is of great significance.
上一条：没有了
下一条：没有了
当前位置 : 
